Save sound lumber. Replace the weak spots.
Wood-fence repair is most valuable when the posts, rails, and pickets are not all failing at the same time. A handful of bad posts or rails can often be repaired while usable sections stay in place, especially when the fence still provides the privacy and layout the property needs.
Pecos tries to match picket width, height, rail layout, board orientation, and trim where practical. Fresh lumber will start lighter than older weathered boards, so an exact color match should not be expected immediately.
Staining can be planned after structural repair when the existing wood is still a good candidate for finish work. We prefer to repair the structure first rather than coating over a fence that is still moving or deteriorating.
Pickets, rails and posts do different jobs
Missing pickets affect privacy and pet containment. Failed rails leave good pickets unsupported. Damaged posts can move entire sections even when the boards still look healthy. The part that looks bad is not always the part driving the repair cost, so it helps to identify the failing layer first.
For a short repair, we try to follow the existing board width, fence height, spacing and trim so the replacement does not look like an unrelated patch. A board-on-board fence and a side-by-side fence need different material counts and may require different tie-ins.
New wood will not match aged wood immediately
Fresh cedar or prestained pickets may stand out next to boards that have spent years in the Texas sun. Staining the repaired section or refinishing a larger run can make the result more cohesive, but an exact color match is not always possible. We would rather set that expectation before the work begins.
When a small repair turns into a section rebuild
If posts and rails are sound, individual picket replacement can be straightforward. If several adjacent rails or posts are failing, taking the repair to the nearest sound post or corner may create a stronger, cleaner result than several small patches. Explore complete wood fence options →
Frequently asked questions
Can individual wood fence boards be replaced?
Yes. Individual pickets and limited groups of boards can be replaced when the rails and posts around them remain sound.
Can you repair wood fence rails?
Yes. Broken or deteriorated rails can often be replaced without rebuilding the entire fence when the supporting posts are still stable.
Will new boards match my old fence?
Fresh lumber is naturally lighter than weathered wood. Stain can help coordinate the appearance, but an exact immediate match is not always possible.
Can you stain the fence after repair?
Yes. Pecos offers fence staining and can coordinate finish work after the repaired fence is structurally ready.